NILO Alloy 36 | Certilas: The filler metal specialist

Go Back

PRODUCT SPECIFICATIONS
PACKAGING
Ask quotation

Type

Filler metal with extreme low thermal expansion.

classification

W.Nr.

1.3912, ~1.3990

Applications

CEWELD® NILO Alloy 36 is specifically developed for welding applications where a very low coefficient of thermal expansion is required. This minimizes the risk of solidification and reheating cracks, making it particularly suitable for precision components and dissimilar joints involving low-expansion alloys.

Type

Filler metal with extreme low thermal expansion.

Applications

CEWELD® NILO Alloy 36 is specifically developed for welding applications where a very low coefficient of thermal expansion is required. This minimizes the risk of solidification and reheating cracks, making it particularly suitable for precision components and dissimilar joints involving low-expansion alloys.

Properties

CEWELD® NILO Alloy 36 is engineered to match the low thermal expansion characteristics of the base material Alloy 36. At the same time, it provides excellent resistance to both solidification cracking and reheat cracking. The alloy is comparable to material numbers 1.3912 and 1.3990.

NILO Alloy 36 is available for GTAW, GMAW and SAW.

Classification

W.Nr.

1.3912, ~1.3990

Suitable for

Invar Alloy 36 / 1.3912 / UNS K93600

NILO Alloy 36, Pernifer 36, Ametek 936, Nicloy 36, Vacodil 36, SimondslnVar136, Invar 36

36Ni. InVar Ⅰ, 36Nickel, 36Н-Вц

Welding positions

Redrying

Not required

Gas acc. EN ISO 14175

I1, I3

Analysis

C	Mn	Ni	Fe	Nb	Ti	Si
0.25	0.5	36	Rem.	1.2	0.25	0.35

Mechanical Properties

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Impact Energy (J) ISO-V	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	RT	Hardness
As Welded	360	550	25	60	HRc

Product sheet

declaration of performance

declaration of conformity

Product sheet

NILO Alloy 36 Mig welding wire

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.